CellPave AP Paver
Description
The CellPave AP Paver is a robust, environmentally friendly ground reinforcement solution designed for high-load applications where both structural stability and natural surface appearance are critical. Manufactured from 100% recycled polymers, its interlocking cellular structure stabilises grassed and gravel surfaces, enabling vehicular access without traditional hard surfacing.
CellPave AP supports sustainable water management by maintaining permeability and allowing natural grass growth, making it suitable for a wide range of applications including access roads, parking areas, emergency vehicle routes, and landscaped environments. Its lightweight, roll-out design allows for rapid installation directly onto existing grassed areas, minimising disruption while providing immediate surface reinforcement.
Benefits
- Made from 100% recycled polypropylene – sustainable and durable
- High load-bearing capacity – suitable for heavy vehicles up to 160 tonnes/m² (subject to site conditions)
- Permeable design supports natural drainage and reduces surface water runoff
- Grass grows through the tiles, preserving a natural green finish
- Minimal ground preparation – no excavation or sub-base usually required
- Roll-out installation enables rapid deployment and reuse if necessary
- Lightweight, interlocking design for efficient handling and placement
- Resistant to cracking, frost, chemicals, UV, oil, and salt
- Safe, splinter-free edges suitable for people, animals, and machinery
- Low maintenance with long service life
- Cost-effective alternative to conventional grass reinforcement systems
- Simple clip system with optional snap-in markers available
- Planning permission generally not required for most installations
Applications
- Heavy-duty access roads and service yards
- Car parks, overflow and temporary parking areas
- Emergency vehicle access routes
- Temporary or permanent roadways and event grounds
- Driveways, golf walkways, and landscaped embankments
- Caravan and storage areas
- Tree beds and sensitive landscaping zones
Size & Install Information
-
Standard Panel: 302mm x 302mm x 37mm (±2%), excluding connecting lugs
-
Mat Size: 1220mm x 920mm (4 x 3 tiles)
-
Weight: Approx. 6.2 kg/m² (550 g per tile)
-
Can be rolled directly into existing grassed areas
-
Interlocking design ensures secure placement without specialist tools
-
Quick coverage of large areas with minimal ground disruption
-
Removable and reusable if required
Technical Specification
Material | High-density recycled polypropylene/polyethylene (PE/PP)
Tile Dimensions | 302mm x 302mm x 37mm (±2%) excluding connecting lugs
Mat Size | 1220mm x 920mm (4 x 3 tiles)
Weight | Approx. 6.2 kg/m² (±2%), 550 g per tile
Cell Dimensions | 50mm x 50mm nominal
Closed Surface Area | 50% with raised grip points
Cell Wall Thickness | 5mm (±2%)
Load Bearing Capacity | Up to 160 tonnes/m²* (subject to ground conditions and sub-base)
Colour | Black
Resistance | UV, frost, oil, salt resistant
Operating Temperature Range | -30°C to +80°C
Pallet Size | 1220mm x 920mm x 2340mm (contains 876 pavers / 73 layers / 80 m² per pallet)
Pallet Weight | Approx. 500 kg
*Performance depends on site conditions, sub-base preparation, and intended load.